Operation With A Router - Gigaset E630 User Manual

Operation with a router

Changing the handset name and internal number
When registering multiple handsets, they will automatically be assigned the names "INT 1",
"INT 2" etc. Each handset will automatically be assigned the lowest unassigned internal number.
The internal number is shown as the name of the handset on the display e.g. INT 2. You can
change the names and the numbers of handsets. The name must not exceed 10 characters in
length.
¤
. . . the list of handsets is opened, the current handset is highlighted with <
to select a handset . . . possible options:
¤
Edit name:
¤
Edit number:
Operation with a router
When operating on the analogue connection of a router, any echoes that may occur can be
reduced by activating XES mode 1 (XES = eXtended Echo Suppression).
If the XES mode 1 does not sufficiently suppress the occurring echoes: activate XES mode 2.
¤
OK Normal mode
OK XES mode 1
OK XES mode 2
If there are no problems with echoes, the normal mode (factory settings) should be
activated.
48
Options Rename
name . . . use
Options Edit Handset No.
number Save
OK . . . use
to enter a new name
OK
. . . press one of the following keys
to delete the current
OK
. . . use to select a
. . . use