Maintenance/Remote Battery Replacement And Interference; Vacation And Long-Term Storage - Bruno ELITE SRE-2010 Operator's Manual

Back of remote control
with battery access
cover removed
SRE-2010 OPERATOR 09-15-2021
MAINTENANCE & LONG TERM STORAGE
General Maintenance Tips
Remote Battery Replacement

Vacation and Long-Term Storage

Once you are ready for the stairlift to return to action,
make sure the batteries are charged and rail free of dust.
Circuit Breaker Note
The stairlift includes an ON/OFF switch with
a built-in circuit breaker that protects the
battery, controller and motor circuits in the
stairlift carriage. It is unlikely the circuit
breaker will trip. However, if the stairlift
becomes inoperative, check the circuit
breaker and reset if needed.
Possible causes of circuit breaker tripping:
ON/OFF switch
with built-in
circuit breaker
• Keep the rail channel clean and free of debris.
• Keep battery charger plugged into a live outlet.
• Contact your Bruno dealer annually to have the
stairlift examined, cleaned and lubricated.
• Remove access panel on back.
• Replace two AA alkaline batteries.
• Change batteries annually.
• Turn off the circuit breaker (ON/OFF switch
near the seat).
• Unplug the battery charger from the wall.
• Reconnect the charger to the wall outlet.
• Turn on the main power switch on the stairlift
carriage.
• Wait until the LED light on the charger turns green to
depict full battery charge.
• Dust rail with wax-based cleaner, such as Pledge
• Foreign object jamming the
rail or gear rack.
• Exceeding the rated weight capacity
of the stairlift.
12
.
®