Dvs-Rs1616; Analog - Sony MK7807V1 Manual Book

Routing Switchers

DVS-RS1616

The DVS-RS1616 is a 16 inputs and 16 outputs routing
switcher for RS-422A control signals. It can also operate
as a 32-port bi-directional router for master/slave
applications. Router control is by S-BUS and RS-422A.
S-BUS is a highly sophisticated system, providing
communication and tally management with BKS-R Series
routing switcher control units, Sony DVS Series video
switchers and so on. S-BUS also interfaces with
third-party equipment. Among the many features that
S-BUS provides are multi-level working, signal breakaway,
phantom operation of crosspoints and tie-line
management. Multiple DVS-RS1616 units, fitted with
cascade kits, can be connected to form a single matrix as
large as 256 x 256. An RS-232C port provides a PC
interface for router set up. Router data is maintained in
memory by a 24-hour battery backup. The DVS-RS1616
mounts in a standard 19-inch rack and is 8U high.
Features
* 16 x 16 switching matrix for RS-422A control signals *
Expandable to provide a maximum matrix size of 256 x
256 * S-BUS and RS-422A control * Backup power supply
and CPU options
Supplied Accessories
AC power cord (for U.S.A and Canada) (1)
AC power cord (for Europe and U.K.) (1)
AC plug adaptor (1)
75 Ω terminators (4)
T-bridge (1)
Plug holder B (black) (1)
Plug holder B (gray) (1)
Operation manual (1)
Maintenance manual (1)
Installation manual (1)
Optional Accessories
RCC-G cables 9-pin/9-pin Cable
RMM-30 Rack Mount Rail
Optional Boards
BKDS-RS1690 Backup Control Board
Optional Peripherals
BKS-R1608 Universal Control Unit
BKS-R1617 Multi-Display Control Unit
BKS-R1618 Universal Control Unit
BKS-R3216 Multi-BUS Control Unit
BKS-R3219 Universal Control Unit
BKS-R3220 X-Y Control Unit
BKS-R3240A X-Y Control Unit
BKS-R3242A X-Y Control Unit
BKS-R3248A X-Y Control Unit
BKDS-RS1691 Backup Power Supply
RS-422A Remote Routing Switcher
Specifications
Inputs/outputs
RS-422A input output:
9-pin, complying to RS-422A standards
Reference video signal inputs:
REF IN connectors (BNC type) (2), high
impedance, analog video, one is for
loop-through connection
Cascade inputs:
CASCADE IN (BKDS-RS1620) 1.27 mm
pitch connectors (68-pin type) (7)
Cascade outputs:
CASCADE OUT (BKDS-RS1620) 1.27
mm pitch connectors (68-pin type) (7)
AC power inputs:
3-pin AC connectors (2)
Remote control connectors
REMOTE 1:
S-BUS (BNC type) (4), 47 kΩ input
Data transfer method: BI-PHASE SPACE
Data transfer rate: 312.5 kb/s
Cable length: 500 m max. (when using
a Belden 8281, Fujikura 5C2V or
equivalent coaxial cable)
Checksum: HDLC CRC-CCIT
x 16 + x 12 + x 5 + 1
19
Rear Panel
REMOTE 2:
Complying with RS-422A signal
standards
D-sub 9-pin (1), 100 Ω/10 kΩ
Data transfer rate: 38.4 kb/s
REMOTE 3:
Complying with RS-232C standard
D-sub 25-pin (1), 9600 b/s, DTR control
8-bit, no parity, no check, 1 stop bit
General
Power requirements:
100 to 240 V AC, 50/60 Hz
1.3 to 0.8 A
Power consumption:
70 W
Operating temperature:
5 to 40 °C (41 to 104 °F)
Storage temperature:
-20 to 60 °C (-4 to 140 °F)
Dimensions (W x H x D):
482 x 354.4 x 450 mm
(19 x 14 x 17 3/4 inches)
(Excluding projecting parts)
Mass:
Approx. 25 kg (55 lb 2 oz)