Hkpf-106M - Sony MK7807V1 Manual Book

Interface Processor D Series

HKPF-106M

The HKPF-106M is a video/audio demultiplexer board that
demultiplexes four AES/EBU-format digital audio signals
from a multiplexed SMPTE291M/292M/299M component
serial digital video signal. The input video signal is
distributed to two outputs. Up to eight pairs/sixteen
channels of audio can be separated from a multiplexed
HD component serial digital video signal by connecting
two HKPF-106M boards in cascade.
Features
* Demultiplexes and outputs the AES/EBU digital audio
signals from an HD component serial digital video signal *
Selection of the audio groups (1-8 or 9-16) to be
demultiplexed * Audio output channel pairs
interchangeable * Support SMPTE292M formats * 1035
(1125)/60i, 59.94i * 1080(1125)/60i, 59.94i, 50i *
1080(1125)/30PsF, 29.976PsF, 25PsF, 24PsF, 23.976PsF
* 720(750)/60P, 59.94P * Auto selection of SMPTE292M
video formats * Format indication on the front panel *
Status output
The HKPF Series function boards install in the PFV-HD Series Interface Units.
Applicable Models
PFV-HD50A HD Digital Video Interface Unit
Specifications
Inputs/outputs
Digital video signal input:
DIGITAL IN connector (BNC type) (1)
HD component serial digital signal
conforming to SMPTE291M/292M/299M
Input impedance:
75 Ω, unbalanced
Input return loss:
15 dB or more (5 MHz to 1.485 GHz)
Transmission loss:
20 dB or less (at 742.5 MHz)
Cable length:
100 m max. (When using a 5C-FB
coaxial cable or PD-3079 COOPER
RG-6/U type Super Low Loss Digital
Video Coax or equivalent)
Digital audio signal outputs:
DIGITAL OUT AUDIO connectors (BNC
type) (4)
AES/EBU-format digital audio signal 75
Ω,
1 Vp-p, unbalanced
Digital video signal outputs:
DIGITAL OUT VIDEO connectors (BNC
type) (2)
HD component serial digital signal
conforming to SMPTE291M/292M/299M
Output signal amplitud:
10% (at 75 Ω)
800 m Vp-p
Output impedance:
75 Ω, unbalanced
Output return loss:
15 dB or more (5 MHz to 1.485 GHz)
Jitter:
Within 673 ps (timing jitter)
Within 135 ps (alignment jitter)
Digital input/output system delay
Video:
1.3 µs (without lip-sync)
HD Audio/Video Demultiplexer Board
General
Power requirements:
+5 V DC: 1.5 A, -5 V DC: 1.2 A
(Supplied from the PFV-HD300A/HD50A
Interface Unit)
Power consumption:
Approx. 15 W
Operating temperature:
5 to 40 °C (41 to 104 °F)
Storage temperature:
-20 to 55 °C (-4 to 131 °F)
Humidity:
10 to 90% (without condensation)
Dimensions
Board (H x W):
194 x 310 mm
(7 3/4 x 12 1/4 inches)
Connector panel (H x D x W):
218 x 98 x 25 mm
(8 5/8 x 3 7/8 x 1 inches)
Mass
Board:
700 g (1 lb 8.7 oz)
Connector panel:
300 g (11 oz)
106
Auto
S/P P/S
HD SD IN
EQ
A/V
DE MUX
Rear Panel
HD SDI OUT 1
HD SDI OUT 2
AES/EBU OUT 1
AES/EBU OUT 2
AES/EBU OUT 3
AES/EBU OUT 4