Bkpf-351 - Sony MK7807V1 Manual Book

Sony power supply interfacing guide book
Table of Contents

Advertisement

Interface Processor D Series

BKPF-351

The BKPF-351 analog audio selector board is an eight
stereo input to one stereo output switching matrix for
analog audio signals. Cross point information is
memorized for 24 hours. Up to four BKPF-350 boards
can be integrated to form a 32 input, 1 output stereo
switching matrix. Inputs are via two D-sub 25-pin
connectors and the output via a Phoenix type 6-pin
connector.The BKPF Series function boards install in both
the PFV-D and the PFV-HD Series Interface Units. In a
PFV-HD Series Interface Unit, they can be installed
together with the HKPF Series function boards.
Features
* Eight analog stereo inputs, one stereo output switching
matrix * Simultaneous control of multiple signals with
matrix level setting * Control from BKS-R Series control
units via S-BUS network * Supports ISR
Applicable Models
PFV-D10 Digital Video Interface Unit
PFV-D300 Digital Video Interface Unit
PFV-D50A Digital Video Interface Unit
Specifications
Inputs/outputs
Audio input:
ANALOG AUDIO IN (L) (R) connectors
(D-sub 25-pin)
(1 each)
Audio output:
ANALOG AUDIO OUT connector
(Phoenix type 6-pin) (1)
Input impedance:
20 kΩ/600 Ω (selectable with on-board
switch)
Output impedance:
Approx. 22 Ω
Nominal input/output level:
+4 dBm
Maximum input level:
+24 dBm
Maximum output level:
+24 dBm (600 Ω load, balanced)
Frequency response:
0.1 dB (20 Hz to 20 kHz, 1 kHz+4
dBm)
Distortion:
0.01% (20 Hz to 20 kHz, at +24 dBm
output)
Crosstalk:
Less than -80 dB (20 Hz to 20 kHz, at
+24 dB output)
Signal-to-noise ratio:
More than 105 dB (30 kHz LPF, at
nominal level)
ISR output information
Status messages:
3 items
Setup messages:
1 item
Analog Audio Selector Board
General
Power requirements:
+5 V DC, 0.5 A
-5 V DC, 1.0 A
(supplied from the PFV-D/PFV-HD Series
Interface Unit)
Power consumption:
Approx. 8 W
Operating temperature:
5 °C to 40 °C (41 °F to 104 °F)
Dimensions (H x W)
Board:
195 x 310 mm (7 3/4 x 12 1/4 inches)
Connector panel:
195 x 25 mm (7 3/4 x 1 inches)
Mass
Board:
Approx. 550 g (1 lb 3 oz)
Connector panel:
Approx. 200 g (7 oz)
ANALOG AUDIO
INPUT (R)
ANALOG AUDIO
INPUT (L)
131
Rear Panel
D-sub 25-pin
1 ANALOG AUDIO OUTPUT (R)
2 ANALOG AUDIO OUTPUT (L)
Phoenix 6-pin

Advertisement

Table of Contents
loading

Table of Contents