Advertisement
ROOF CONSTRUCTION
STEP 1.
Secure peak brace to ridge beam and
roof panel with one screw at each end,
see A below.
STEP 2.
Move the other roof panel into position
and secure peak brace to ridge beam
and roof panel with one screw at each
end, see B below.
- WARNING -
Do not climb on or walk
on the roof.
Absco Industries
Assembly Instruction Manual
ABSCO WORKSHOP SHED
MODEL: 45232WK
4.48mW x 2.26mD x 2.00mH
STEP 3.
Secure both roof panels to the walls with
one screw in each corner first, followed
by two screws adjacent to the portal
frame as shown.
STEP 4.
Secure roof panels to the top chords of
the portal frame using 45mm self drilling
tek screws.
Model: 45232WK
A
X4
27/09/2018
1.30
B
36
Advertisement
