Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ABSCO SHEDS Manuals
  4. Outdoor Furnishing
  5. 45232WK
  6. Assembly & instruction manual

ABSCO SHEDS 45232WK Assembly & Instruction Manual

Workshop shed
Hide thumbs Also See for 45232WK:

Advertisement

Quick Links

Download this manual
AU: 1800 029 701
N Z: 0800 466 444
For construction in non-cyclonic areas
Wind rating: N2 as per AS4055-2012
When laying concrete slab, ensure there
is a rebated edge 25mm deep around the
perimeter. This will help water egress from
the base of the shed.
shed. For further assistance please visit our detailed
MANU FA CT URED
IN A US TR ALIA
At ABSCO Industries we are always looking to be
number ONE, so please let us know what you think
SNAPTiTE
Assemb ly
ABSCO INDUSTRIES
Absco Industries
Assembly Instruction Manual
ABSCO WORKSHOP SHED
MODEL: 45232WK
4.48mW x 2.26mD x 2.00mH
admin@absco.com.au
www.abscosheds.com.au
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A
REBATED EDGE 25mm DEEP
AROUND THE PERIMETER
THIS WILL HELP WATER EGRESS
FROM THE BASE OF THE SHED
We thank you for choosing an Australian made
instructional video library at
Http://www.abscosheds.com.au/watch-videos
of our instructions. Feedback makes us better.
feedback@absco.com.au
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
Premier Shed Model: 23151GK
Download the Absco
Sheds Assembly App
for instructional videos
SHED MODEL: 23151GK
Model: 45232WK
FRONT: 2.26m
SIDE:
HEIGHT: 1.95m
BOTTOM CHANNEL
REBATED EDGE
75mm WIDE REBATE
CONCRETE SLAB
21-11-2017
27/09/2018
1.30
1.52m
PAGE 01
1

Advertisement

loading

Related Manuals for ABSCO SHEDS 45232WK

Summary of Contents for ABSCO SHEDS 45232WK

  • Page 1 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH AU: 1800 029 701 admin@absco.com.au N Z: 0800 466 444 www.abscosheds.com.au Absco Industries Premier Shed Model: 23151GK FRONT: 2.26m SIDE: 1.52m HEIGHT: 1.95m WHEN LAYING YOUR CONCRETE For construction in non-cyclonic areas...
  • Page 2 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH GENERAL INSTRUCTIONS • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST"...
  • Page 3 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH COMPONENT PACKING LIST Check off all components. MAIN PACK CARTON (PACK 1 OF 2) COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION RIDGE STEEL SHEET 97AL BEAM 1915mm X 773mm...
  • Page 4 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH COMPONENT PACKING LIST FITTINGS & ACCESSORIES PACKET CONTENTS DOOR STRAP CHANNEL JOINER L: 165mm L= 200mm (7.9") CAP GABLE RIDGE L: 170mm PLATES RIDGE CAP SELF TAPPING SCREWS JOINER PACKET CONTAINING 100...
  • Page 5 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH COMPONENT PACKING LIST MAIN PACK CARTON (PACK 2 OF 2) COMPONENT PART COMPONENT PART CHECK CHECK CHECK DESCRIPTION DESCRIPTION STEEL SHEET STEEL SHEET 1785mm X 773mm 1915mm X 773mm 45232WCP-(J)
  • Page 6 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH COMPONENT PACKING LIST 45232WCP CHANNEL PACK COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION 55AL 55AR CHANNEL CHANNEL L = 1496.5mm L = 1463.5mm 55BL 55BR CHANNEL CHANNEL L = 1496.5mm L = 1496.5mm...
  • Page 7 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH COMPONENT PACKING LIST 45232WCP CHANNEL PACK (CONT.) COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION CHANNEL CHANNEL WITH HINGES L = 1143mm L = 1725mm CHANNEL CHANNEL L = 1725mm...
  • Page 8 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
  • Page 9 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other JOIN>> JOIN>> <<JOIN JOIN>> Step 1. Step 2. Position the channels and the...
  • Page 10 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH PRE-ASSEMBLY OF SPLICED CHANNELS Join together 20 x channel sections using 10 x channel joiners (Part CSJ) NOTE: Some channels may have holes in them - You will need to redrill holes where CSJ joining channel covers them.
  • Page 11 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH Guide on Joining a Spliced Ridge Beam Follow these three steps to assemble a ridge beam. ZARSP 225mm 50mm Step 1. NOTE. Step 2. Place two ridge beams as There is a 50mm overlap of the Use the ZARSP to connect at shown and push them together.
  • Page 12 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH PRE-ASSEMBLY OF SPLICED RIDGE BEAM ZARSP = 1x 97A 1x 97AL 1x 97AR Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 13 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH JOINING RIDGE BEAMS To make the total span we must now join the ridge beams Cut away these two only. Using a hacksaw, remove one protruding section of each ridge beam, this will allow the sections to butt up neatly to each other.
  • Page 14 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH OVERVIEW OF ROOF COMPONENTS Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 15 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH OVERVIEW OF WALL COMPONENTS Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...

  • Page 16: End Panel Assembly

    ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH END PANEL ASSEMBLY 1x required. 1x required. Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 17 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH LARGE ROOF PANEL ASSEMBLY 2 required. When completed there will be two sections with 86A lip at one end only. One panel will have part 86A fitted to this end only.
  • Page 18 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH SMALL ROOF PANEL ASSEMBLY 2 required. When completed there will be two sections with 86A lip at one end only. One panel will have part 86A fitted to this end only.

  • Page 19: Front Panel Assembly

    ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH FRONT PANEL ASSEMBLY 1 required. Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 20 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH FRONT PANEL ASSEMBLY 1 required. Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 21 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH DOUBLE DOOR ASSEMBLY 1 required. Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange fl ange of of channel channel Four hole set for padbolt connection.

  • Page 22: Door Panel Assembly

    ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH DOOR PANEL ASSEMBLY Nuts and bolts may be used instead of pop rivets by drilling out hinge holes using a 4mm drill bit. Both are supplied. The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for proper alignment, position each hasp centrally over the padbolt shaft and drill 3mm holes and secure with screws.
  • Page 23 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH JOINING WALL AND ROOF PANELS To make the total span we must now join sections of sheeting together for the roof and wall. Trim the channels by 16.5mm to 16.5 16.5...

  • Page 24: Side Panel Assembly

    ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH SIDE PANEL ASSEMBLY 2 required. Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 25 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL FRAME DETAILS 1 required. PART C1106 PART C1482 PART C1704 80mm TIP: An easy way to make sure that the angle at the top of the portal frame is correct is to use the gable wall panel as a template to lay the sections out.
  • Page 26 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL FRAME DETAILS STEP 1. x 19 STEP 2. Secure ridge plates x 30 to apex plates STEP 3. M10 Dynabolt STEP 4. 45mm TEK SCREW Portal to panel connection, see section PANEL CONSTRUCTION for further infomation.
  • Page 27 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 1. Draw pattern on the concrete in accordance with the dimensions detailed in the assembly instructions. Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018...
  • Page 28 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 2. Understand where components are to be positioned Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 29 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 3. Join rafter to column with knee plate Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 30 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 4. Join both rafters using the apex plate Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 31 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 5. Secure ridge plate (RBP) Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 32 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 6. Secure multi purpose brackets Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 33 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH CENTRE PORTAL ASSEMBLY SUPPORT PHOTOS STEP 7. Turn frame over and repeat steps 4 and 5. Absco Industries Assembly Instruction Manual Model: 45232WK 27/09/2018 1.30...
  • Page 34 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH PORTAL FRAME DETAILS FIG 8A 1550 3030 Concrete slab Centreline of frame 4580mm x 2360mm uprights 4580 Multi purpose Centre frame brackets upright 80mm long SLAB EDGE • Secure multipurpose brackets to uprights using self drilling screws •...
  • Page 35 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting. The base channels are not.
  • Page 36 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH ROOF CONSTRUCTION STEP 1. STEP 3. Secure peak brace to ridge beam and Secure both roof panels to the walls with roof panel with one screw at each end, one screw in each corner first, followed see A below.
  • Page 37 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH FINAL CONSTRUCTION ANCHORING OF SHED Refer to section STEP 1. PORTAL FRAME Secure the roof panels to the wall panels for portal anchor as shown. Location of 20 concrete locations.
  • Page 38 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH Absco Large Gable Roof Shed Notes General • 1.G This instruction manual shall be read in conjunction with other consultants drawings, specifi cations and written instructions provided by Absco and/or their representatives.
  • Page 39 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH Absco Large Gable Roof Shed Notes Steelwork • 1.S All structural steelwork shall have a corrosion protection system applied consistent with AS/NZS 2312- 2002. • 2.S All structural steelwork detailed within this installation manual shall be minimum Grade 550 for roll formed sections (including roof and wall sheeting and portal frame members) and Grade 250 for angle sections.
  • Page 40 ABSCO WORKSHOP SHED MODEL: 45232WK 4.48mW x 2.26mD x 2.00mH Absco Large Gable Roof Shed Notes Supporting Slab and Foundations • 1.F The supporting slab foundation for the garden shed shall be of a minimum size indicated on the installation manual.
  • Page 41 Absco Sheds Storage Guidelines • Absco Sheds are designed to be weatherproof for normal weather conditions. In the event of extreme weather conditions such as heavy rain, combined with high wind gusts, the ridge capping, sheeting joins, screw fi xings etc., may exhibit minor deformations which may allow some water entry. These areas should be checked regularly to ensure that maximum strength and protection is maintained.
  • Page 42 4.48mW x 2.26mD x 2.00mH Australia Product Warranty Against Defects • Absco Sheds, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. • We are pleased to advise we warrant that the steel coating will not rust, crack, fl ake peel or blister for 30 years from date of purchase, when installed within Australia.