Advertisement
DOOR PANEL ASSEMBLY
91A
Nuts and bolts may be used instead of pop rivets by
drilling out hinge holes using a 4mm drill bit. Both
are supplied.
The two holes required to connect the padbolt hasp for each door have not been pre-punched, to
allow for proper alignment, position each hasp centrally over the padbolt shaft and drill 3mm holes and
secure with screws.
Absco Industries
ABSCO WORKSHOP SHED
MODEL: 45232WK
4.48mW x 2.26mD x 2.00mH
Assembly Instruction Manual
91A
A
Model: 45232WK
B
27/09/2018
1.30
22
Advertisement
