Advertisement
JOINING RIDGE BEAMS
To make the total span we must now join the ridge beams
97C
Using a hacksaw, remove one protruding section
of each ridge beam, this will allow the sections to
butt up neatly to each other.
97C
Absco Industries
Assembly Instruction Manual
ABSCO WORKSHOP SHED
MODEL: 45232WK
4.48mW x 2.26mD x 2.00mH
97A
97A
98A
Finished
Joined Ridge Beams
Cut away these two only.
Model: 45232WK
27/09/2018
Do not cut off the
protruding section at each
end of the full length ridge
beam
Section View
1.30
13
Advertisement
