Technical Data; Mechanical And Electrical Data - Siemens SIMATIC NET MM900 Series Compact Operating Instructions

Pulling a media module
To pull a media module, follow the same steps as when plugging, but in the reverse
order:
1. Pull out the handle of the media module.
2. Pull the media module out of the device slot.
3. Close the device slot with a dummy cover if you are not plugging in another
module.
NOTICE
Operating the device only with closed module slots
The device meets degree of protection IP20, if all the module slots have either
media modules inserted or are closed by dummy covers. Do not start up the
device with open module slots since the ingress of objects can lead to damage.
4

Technical data

4.1

Mechanical and electrical data

Device variants
The following technical specifications apply to the following device:
● MM900 media module for SCALANCE XR-500M
Note
Degree of protection of the media modules
Note that the media modules do not have a degree of protection. The degree of
protection is only relevant for the basic devices.
MM900 media modules for SCALANCE XR-500M
A5E03275846-04, 11/2015
Technical data
9