Installation
2.3
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function
according to the specification.
If you use damaged parts, this can lead to the following problems:
Injury to persons
•
Loss of the approvals
•
Violation of the EMC regulations
•
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
If the consignment is incomplete or if there is damage to the exterior, contact your
supplier or your local Siemens office.
3
Installation
NOTICE
Failure of the data traffic due to contamination of optical plug-in connections
Optical sockets and plugs are sensitive to contamination of the end face.
Contamination can lead to the failure of the optical transmission network.
Close unused optical sockets and plugs as well as pluggable transceivers and slots
with the supplied protective caps.
Remove the protective caps only immediately before you use the plug-in
connection.
NOTICE
Use only approved media modules
In the module slots of SCALANCE XR500, use only approved media modules
"MM900" of the X-500 IE switch product line.
6
MM900 media modules for SCALANCE XR-500M
A5E03275846-04, 11/2015