Basic Operations - Toto Washlet SG Instruction Manual

Basic Operations

Press a button on the remote control; a beep sounds when the main unit receives the signal.
Personal setting lock
[USER1] / [USER2]
You can store your preferred wand position, water pressure and water temperature a setting.
● To store a setting
While cleansing is in progress, set your preferred wand position, water pressure, and warm water
temperature, and then press and hold [USER 1] or [USER 2] for 2 seconds or longer.
● To use
Press [USER 1] or [USER 2], and then press the button for the cleansing you want to use.
*The wand position and water pressure lamps will light up for about 10 seconds in their set positions,
and the water temperature display switches.
16
Opening and closing
[SEAT OPEN/CLOSE]
Opens and closes the toilet seat.
Stopping
[STOP]
Stops the operation.
Cleansing
[REAR]
Cleanses your rear.
*
[SOFT]
Washes your rear with mild water pressure.
*The mode changes between [SOFT] (Flickering) and
[REAR] (Lit) each time the button is pressed.
[FRONT]
Serves as a bidet for ladies.
Drying
[DRYER]
Dries your rear.
Functions that operate when a button is pressed during "REAR", "SOFT" or "FRONT" cleansing.
Note
Sitting back on the toilet seat makes it easier to
adjust the wand position and to reduce splashing.
[OSCILLATING]
●The wand moves back and forth to
wash your rear thoroughly.
The setting changes between "ON" and
"OFF" each time the button is pressed.
[POSITION]
●The wand position can be adjusted to
the front or rear.
the rear)
[PULSATING]
●Washes with the water pressure
pulsating between soft and strong.
The setting changes between "ON" and
"OFF" each time the button is pressed.
[PRESSURE]
●The water pressure strength can be
adjusted for cleansing functions such
17