Toto Washlet SG Instruction Manual page 19

Maintenance
Descaling mode
2 Drain water passage.
(1)
Use to select [YES].
Press [ENTER].
Water passage is drained
(for about 30 seconds.)
• You will hear short beep sound while
the work is in progress, and a long beep
sound upon completion.
•
Water comes out from around the wand.
• [POWER] LED (green) and [ENERGY
SAVER] LED (green) will fl ash.
(The LEDs will continue to fl ash until the
completion of entire descaling work)
(2) When the beep stops
Press [ENTER].
Attention!
● The display shows [FILLING IN THE DESCALING AGENT (1/2)], but please DO NOT press [ENTER] until you
have completed fi lling in descaling agent.
(Descaling will not work correctly)
3
Dilute agent with water. (1st time)
(Please see on page 34.)
How to dilute
4 Close the lid and remove cover and cap on the top face of product.
Attention!
● Please retain cover and cap.
36
Descaling mode
DESCALING MODE 1/1
START
DESCALING MODE ?
YES
DESCALING MODE
DEVICE IS
WORKING
PLEASE WAIT
ABOUT
30 SECONDS
DESCALING MODE 1/1
DOES THE BEEP STOP?
PUSH[ENTER]
Cap
Cover
<If you think the water pressure has weakened>
<When [POWER] LED (orange) and [ENERGY SAVER] LED (orange) fl ash> (Continued)
5 Insert funnel and pour diluted agent. (1st time)
Funnel
Agent port
6 Perform descaling. (1st time)
(1) Press [ENTER].
Descaling will be performed
(for about 30 seconds)
• You will hear short beep sound while
the work is in progress, and a long beep
sound upon completion
•
Water comes out from around the wand
and mist nozzle.
(2) When the beep stops
Press [ENTER].
Attention!
● The display shows [FILLING IN THE DESCALING AGENT (2/2)], but please DO NOT press [ENTER] until you have
completed fi lling in descaling agent.
(Descaling will not work correctly)
7
Dilute agent with water. (2nd time)
(Please see on page 34.)
How to dilute
8 Pour diluted agent. (2nd time)
5
(Please see on page 37.)
Attention!
● Please wait until funnel is empty.(Descaling will not work correctly)
Beaker Attention!
● Please wait until funnel
is empty.
(Descaling will not work
correctly)
DESCALING MODE 1/1
FILL IN THE
DESCALING AGENT (1/2)
PUSH[ENTER]
DESCALING MODE
DEVICE IS
WORKING
PLEASE WAIT
ABOUT
30 SECONDS
DESCALING MODE 1/1
DOES THE BEEP STOP?
PUSH[ENTER]
3 37