Descaling Mode - Toto Washlet SG Instruction Manual

Maintenance

Descaling mode

Flash (orange)
Flash (orange)
Items to prepare
Beaker
(included item)
Descaling agent (TOTO specifi ed)
Attention!
● Please use one of the following descaling agents at specified concentration. (Failure to do so may cause
damage)
● If you wish to use other agents, please contact us at the phone number on the back of this manual.
Product name Manufacturer
®
Sidol Universal-Entkalker (liquid)
®
Bref POWER
Henkel AG &
Universal-Entkalker (liquid)
Co. KGaA
Oust ® ALL PURPOSE DESCALER
(liquid)
How to dilute
100
60
50
Water(40)
Agent(20)
Pour and mix thoroughly
If the beaker is missing
■
Please use a clean cup and dilute 20ml of
agent with 40ml of water.
[SIDOL] , [Bref POWER] and [OUST] are registered trademarks of [Henkel AG & Co. KGaA].
[swirl] is a trademrk of company of the [Melitta Group].
34
Descaling mode
Please perform
Descaling mode
Funnel
(included item)
Product name Manufacturer
®
swril Anti Calc Bio Power
Concentrate
swril ® Anti Calc Bio fl üssig Melitta Group
swril ® Жидкий очиститель от
накипи CITRUS-CLEAN
How to dilute
100
60
50
Water(50)
Agent(10)
Pour and mix thoroughly
If the beaker is missing
■
Please use a clean cup and dilute 10ml of
agent with 50ml of water.
<If you think the water pressure has weakened>
<When [POWER] LED (orange) and [ENERGY SAVER] LED (orange) fl ash>
Note
●(Rear, bidet and soft) cleansing modes cannot be used from step 2 "Drain water passage" until 60 minutes after step 9
"Descaling (2nd time)" is performed.
(Toilet can be fl ushed)
●Lid will not open automatically from step 2 "Drain water passage" until 10 minutes after step 9 "Descaling (2nd time)" is
performed. Please open manually.
●If the work is delayed for more than 30 minutes between steps 2 and 9, descaling agent will be drained to the toilet with a
long beep sound to alert.
●If you wish to restart, please wait for 30 minutes and go back to step 1.
1 SET DESCALING MODE.
• Operate with the buttons on the back side of the remote control.
(1) Press [MENU].
(2) Use to select [CLEANING].
Press [ENTER].
(3) Use to select
[DESCALING MODE].
Press [ENTER].
The display changes to [START
DESCALING MODE?]
Remote control
display
MENU 1/4
1. CLEANING
2. ENERGY
SAVER
CLEANING 1/2
1. WAND CLEANING
MODE ON/OFF
2. DESCALING MODE
CLEANING 2/2
1. WAND CLEANING
MODE ON/OFF
2. DESCALING MODE
DESCALING MODE 1/1
START
DESCALING MODE ?
NO
3 35