Table of Contents
Advertisement
FREIGHT DAMAGE CLAIMS PROCEDURE
The deliverer of your equipment (freight company, distributor or dealer) is responsible for loss or damage of your
shipment. All claims must be filed with the deliverer of your equipment. Please follow the steps below to deter-
mine if your shipment is satisfactory or if a claim must be filed:
1. Check the number of products delivered against the number of products listed on the delivery receipt.
Should the totals not match, have the driver note all errors on both copies and both you and the driver sign
and date said notation.
2. Inspect all cartons for visible damage. Open and inspect as required before the driver leaves and have him
or her note any damage on the receipts. All damaged claims must be inspected within 15 days of delivery.
Notify your carrier immediately if concealed damage is found after delivery.
3. Should concealed damage be found when product is unpacked, retain the packing material and the product
and request an inspection from the deliverer.
4. All claims for loss or damage should be filed at once. Delays in filing will reduce the chance of achieving a
satisfactory resolution to the claim.
TECHNICAL SPECIFICATIONS
S Cube Size: 5/8"W X 7/8"H X 7/8"D
S Ambient Temperature: 50_F/10_C – 100_F/38_C
S Water Temperature: 50_F/10_C – 90_F/32_C
S Water Pressure: 20–80 psi
S Maximum Fuse Size: See Nameplate
S Circuit Amp: See Nameplate
S Refrigerant Type: R–404a
S Refrigerant Charge: See Nameplate
Microban
IMI Cornelius Ice Maker Product includes Microbanr Built–In Product Protection to inhibit the
growth of odor and stain causing bacteria, mold, and mildew. This will improve the units per-
formance between cleaning, but should not exclude the standard cleaning process. Please
refer to the Maintenance section of this manual for proper cleaning procedures. Microban is
a registered trademark of the Microban Products company, Huntersville NC 28078.
630460146OPR
GENERAL
4
December 22, 2005
Hide quick links:
Advertisement
Table of Contents
