Proteus LDT-8850 Manual page 6

6. Mat slippage may be occurred for a short time. If it persists, adjust the running mat tension as
per direction in the owner's manual ( adjust belt tension ). Do not over-tighten, as this will
decrease the life of the mat and place undue stress upon the roller bearings.
7. If you are uncertain of any procedure or lack
of correct tools, please contact your dealer.
We recommend a qualified technician
carry out work involving removal of the
motor cover.
03
c. Silicon
Silicon spray warning
KEEP OUT OF REACH OF CHILDREN !
If swallowed or sprayed directly on face, seek medical advice immediately.
If spilt, clean up immediately, as slippage hazard may result.
Note : This product may cause damage or loss if used otherwise than strictly in accordance
with the directions for its use.
This product is sold only subject to these conditions and upon the basis that it is used solely at the
purchaser's own risk and the manufacturers and distributors hereby exclude themselves from all
liability in relation to this product howsoever arising.
( clean ) ( instruction )