Assembly - Air Pressure Shaft - Proteus LDT-8850 Manual

d Assembly for air pressure shaft & retractable tube
Pull the spring pin ( 66 ) out of the assembling machine, folding the machine upright, one side of air
pressure shaft ( 12 ) been assembled on machine base, now, assemble the other side air pressure
on main frame ( there is are pressure shafts on each side ).
While assembling the air pressure shaft, rise the frame to
upright position ( there will be a click sound ),
pull spring pin ( 66 ) and move up slightly, to match
up the air pressure position. Then press the air
pressure shaft to complete the assembly.
After complete the assembly, move the machine
down to the normal ( horizontal ) position.
*** CAUTION ***
While the frame been moved to exceed top position, It is heavy and without any support.
Pls hold it very carefully.
Strongly suggest to assemble this machine with two persons.
After assembled the air pressure shaft, suggest it to upright very top position, then lay the
machine to horizontal position.
1
12
12
51
65
12
66
68