Adjust The Machine - Proteus LDT-8850 Manual

7 Adjust the machine

a Adjust belt tension
FACTORS THAT AFFECT MAT ALIGNMENT.
1. The treadmill must be on a level surface.
2. While user running with an uneven stride, the mat
should return to center after exercise.
3. Maintain the correct mat tension. In principle, the belt
was adjusted by the belt adjusting screw in the back
of the machine, if need to adjust the roller, do not
adjust the roller by yourself. Pls ask distributor for help.
CORRECT BELT TENSION :
Pay attention to the belt tension in order to make sure the machine working smoothly, and to
avoid short life of parts If there is any slipping belt, the belt needs to be adjusted.
To increase belt tension: adjust the left / right adjusting screw clockwise with one turn each.
To decrease belt tension: adjust the left / right adjusting screw counterclockwise with one turn each.
Warning : Do not adjust the belt too tight. Otherwise, the belt will be damaged.
If the above procedure could not improve the belt slipping, tension motor drive belt might need to
be adjusted. Pls contact distributor for help.
Again, pls do not adjust the belt too tight. Otherwise, not only the belt will be damaged but also the
roller bearing will be damaged due to tension pressure.
CW
CCW
CW
CCW
16