Upright Tube Assembly - Proteus LDT-8850 Manual

c Upright tube assembly
Put 33 upright tube unit ( right ) besides the main frame, connect the frame control wire (A) ( 5-pins )
onto upright tube control wire (A) ( 5 -pins ), then connect elevation wire (B) ( 3-pin ) onto elevation
control wire (B) ( 3-pin ) on upright tube unit ( right ). Assemble upright tube unit ( 33 ) onto frame
assembly ( 51 ) pre-fix with screw ( 35 and 36 , then
assemble upright tube unit ( 32 ) onto frame assembly ( 51 ), pre-fix with screw ( 35 & 36 ) bue not
fully tighten the machine before complete assembly. Tighten screw ( 35 and 36 ) after complete
assembly.
33
B
11
A
B
36
A
32
1
51
34
35