Table of Contents
Advertisement
Foot control S-NW
CAN dongle activated
Icon visible on display
> CAN dongle inserted
> Control unit switched on
> Foot control actuated
Pairing
The foot control S-NW and the CAN dongle are paired by default.
If pairing is inactive, you can activate pairing on the control unit (see Implantmed instructions for use)
and follow the directions.
Press and hold the green and orange buttons simultaneously on the S-NW foot control for at least 3 seconds.
Disable pairing
Press and hold the green, orange and yellow buttons simultaneously on the foot control S-NW for at least three seconds.
Using multiple W&H control units simultaneously
Press and hold the orange button on the foot control S-NW for 3 seconds to switch between the various control units.
Description of CAN dongle
19
Advertisement
Table of Contents
