Table of Contents
Advertisement
Adjustement measure for control stage tool M
The measure controls occur for an incorporated control pin (16, 76), that is to say the control rod
Beware:
(20) is on the piston (23), the sleeve is still closed. The control rod is delivered with an excessive
length and must for this reason be shorted by replacing corresponding to the adjustment measure
and lastly borderless rounded .
Piston (23)
The piston of the control stage must lightly slide in its conduction.
3.3 Torque
pos. no.
(9)
(4)
3.4 Lubricants
part (to be greased slightly )
all o-rings,
all sliding surfaces and movable parts
adjusting screw (44, 116)
spring plate thread and recession
all fastening and
pipe screws
610.20 p. 6
torque
M
in Nm
a
30
2,5
lubricant
silicone grease
mounting paste
high pressure
grease
part no.
00 027 081
00 027 091
00 027 058
Advertisement
Table of Contents
