Messages To The Rover; Settings - Xeos Technologies Inc. Rover User Manual

Messages to the Rover

Settings

The $settings command will return a truncated list of important Rover settings aside from timers:
Name Default
GPS Settings (GPS)
MxOn 180
MxPr 90
Tmn -30
Vmn 9.000
gBlk0 0,0
gBlk1 0,0
gRtQ 2
gRtyD 20
gFRst 50
wcIC 85
gBL 24
gFQ 12
System Settings (Sys)
PB Build
BtP Y
BtT 5
BtN Name
LL 0
UC Code
aes No
rHr 0
rMn 2
Iridium Settings (Ird)
iBlk0 0,0
iBlk1 0,0
iRtyQ 2
Smx 8
MxLn 330
iWR Yes
um 3
Tilt is not used.
Rover User Manual Version 3.0
Description
Maximum GPS session length in seconds
Maximum GPS session length in poor conditions
Temperature minimum
Voltage minimum
Unused
Unused
GPS retry quantity
GPS retry delay in seconds
Number of GPS failures for GPS reset
Watch Circle Inner Percent
Maximum saved GPS fixes
Maximum GPS fixes per message
Firmware Build
Bluetooth on or off
Bluetooth Timeout in minutes
Bluetooth Name
Diagnostic Log detail level
Unlock Code
AES Encryption On/Off
Hour on which timings are based (24h UTC)
SBD hour offset in minutes
Iridium Blackout, Unused
Iridium Blackout, Unused
SBD Retry Quantity
Maximum SBD attempts per session
Maximum message length (bytes)
Wait for registration
Unsolicited messages allowed
20