Sending Commands Using XeosOnline
Before using XeosOnline make sure that your account has been set up and your device added to
your organization. Contact activations@xeostech.com for more information.
Setting up to Send
Navigate to the Send Command window.
From the Home Tab, choose
File > Send Command
Select the units you wish to target with commands and move them
over to the right-hand target list using the -> button. Type your
command(s) into the command box and press send.
Remember to include the dollar sign ($) ahead of each command, and enter each command on a
separate line.
Outgoing messages will appear in the Message Log for the commanded device.
Xeos Beacon Bluetooth App
Select Xeos products can be configured locally using the
Xeos Beacon Android
App. This method
of communication requires no disassembly.
The Bluetooth app allows for communication, configuration, logging and firmware updates. A
detailed document on how to use the application can be found
here.
Rover User Manual Version 3.0
19