Appendix A: Part Sourcing Summary - Xeos Technologies Inc. Rover User Manual

Appendix A: Part Sourcing Summary

Battery Compartment
Source:
O-Rings
Part Number:
Source:
Maintenance:
Seal Lubrication
Part Number:
Source:
Maintenance:
Procedure:
Rover User Manual Version 3.0
Repair or replacement must be done by Xeos Technologies Inc.
1-902-444-7650 or support@xeostech.com
Only use new, approved batteries for deployments. In the event used
batteries are for short term testing, batteries must have equivalent
battery voltages to prevent reverse charge forming and subsequent
battery leakage.
Visual inspection of the battery compartment should be done after
each deployment to ensure there has been no leakage. Signs of
corrosion, leakage or water ingress should be reported to Xeos
immediately.
568-138 90D DURO BUNA (White Section)
568-137 90D DURO BUNA (Black Section)
O-rings may be purchased through Xeos Technologies Inc. or from a
variety of vendors. Please call for assistance if required.
O-rings should be visually inspected prior to each deployment, no
matter how short. Any evidence of wear or stretching requires that
they be replaced.
O-rings should always be replaced after a deployment of 2 months or
more. O-rings should also be replaced after a series of short
deployments adding up to 2 months.
Molykote 111
Lubrication may be purchased through Xeos Technologies Inc. or
from a variety of vendors. Please call for assistance if required
Lubrication should be used each time the O-Ring is removed and
reseated
Squeeze a thin layer of lube onto the O-Ring. Gently spread the lube
around the O-Ring until it is completely coated. Follow instructions
for seating the O-Ring
38