Table of Contents
Advertisement
LTE TDD Base Station Installation Guide
Figure 3-7 Transportation the Antennas in the Height
3.
Fix the pole vertically to the ground or concrete pillars on the rooftop using
expansion screws, and fasten it with steel wires. Then, mount the directional
outdoor antenna onto the pole using the installation rack, as shown in Figure 3-8.
Figure 3-8 Directional Antenna Installation
4.
When the base station has been installed in a proper position, connect all the cables
and wires.
5.
Run tests, then seal and weatherproof all the connections after the testing has
successfully completed. Refer to 2.6 Weatherproof Protection.
16
Advertisement
Table of Contents
