Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
This manual has safety information and instructions to help
you eliminate or reduce the risk of accidents and injuries.
A.
Recognize Safety Information
T his is the safety alert symbol. It is used to
alert you to potential physical injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
B.
Understand Signal Words
A signal word will identify safety messages and
property damage messages, and will indicate the
degree or level of hazard seriousness.
indicates a hazardous situation that,
if NOT avoided, could result in death or serious in-
jury.
indicates a hazardous situation that,
if NOT avoided, could result in minor or moderate
injury.
is used to address practices NOT
related to physical injury.
C.
Supplemental Directives
R ead and follow all safety information and
instructions to avoid possible injury or death.
Read and understand these instructions be-
fore [installing / using / servicing / performing
maintenance on] this product.
GENERAL INFORMATION
A.
Required Tools
●
Electric Drill (optional)
●
Torque Wrench
●
Phillips Screwdriver / Bit
●
3 mm Hex Key / Driver / Bit
●
6 mm Hex Key / Driver / Bit
●
6 mm Hex Key Socket
●
10 mm Socket
B.
Required Hardware
8' - 13' Models:
(1) Mounting Bracket
(12) M6 X 50 mm L Carriage Bolt
(12) M6 Split Lock Washer
(12) M6 Flat Washer
(12) M6 Locknut With Nylon Insert
(6) #8-18 X .38 Self Drilling Flat Head Screw
I ncorrect [installation / operation / servicing /
maintaining] of this product can lead to seri-
ous injury. Follow all instructions.
The installation MUST comply with all ap-
plicable local and national codes, including
the latest edition of the following standards:
U.S.A.
● ANSI/NFPA70, National Electrical Code
(NEC)
● ANSI/NFPA 1192, Recreational Vehicles
Code
CANADA
● CSA C22.1, Parts l & ll, Canadian Electri-
cal Code
● CSA Z240 RV Series, Recreational
Vehicles
D.
General Safety Messages
Failure to obey the following warn-
ings could result in death or serious injury:
● This product MUST be [installed / serviced] by a
qualified service technician.
● Do NOT modify this product in any way. Modifica-
tion can be extremely hazardous.
C.
Additional Hardware Quantity
15' - 16' Models ONLY:
(4) M6 X 50 mm L Carriage Bolt
(4) M6 Split Lock Washer
(4) M6 Flat Washer
(4) M6 Locknut With Nylon Insert
(2) #8-18 X .38 Self Drilling Flat Head Screw
3
Advertisement
Table of Contents
