Connect The Power Cord - Sony MDS-E10 Operating Instructions Manual

xWhen connecting with digital components
(CD player, DAT recorder, other MD recorders,
mixer with coaxial digital input/output jacks or
optical digital input/output connector.)
When this recorder is connected with a CD player,
MD recorder, or DAT recorder, digital recording can
be performed. Use an optical digital connecting
cable (POC-15A) or a coaxial digital connecting cable
(VMC-10) that can be purchased separately.
• When using an optical digital connecting cable
Take the caps off the connectors and insert the cable
plugs securely.
MD recorder
DIGITAL
ç : Flow of signal
• When the coaxial digital cable is used
MD recorder
DIGITAL
IN
OUT
COAXIAL
ç : Flow of signal
z A sampling rate converter is mounted in this recorder
All digital input signals are converted to the
sampling frequency (44.1 kHz) of an MD recorder
for recording.
Therefore, this allows you to record sources such as
32 or 48 kHz DAT or satellite broadcasts, as well as
CDs and MDs.

3 Connect the power cord.

Digital component
DIGITAL
OPTICAL
IN OUT
Ç
Ç
Digital component
DIGITAL
COAXIAL
IN OUT
Ç
Ç
17