Hooking Up The Audio Components - Sony MDS-E10 Operating Instructions Manual

Hooking Up the Audio
Components
Hook up a mixer, CD player, DAT recorder, and other
components to the MD recorder. Be sure to turn off the
power of each component to do so.
OUT IN
Mixer
DIGITAL DIGITAL
COAXILAL OUT COAXILAL IN
CD player or
DAT recorder,
MD recorder
DIGITAL
OPTICAL OUT
ç : Flow of signal
z When the remote is used as the wired remote
Use the supplied control S cable to connect the jack at
the front of the remote with the control jack of the
recorder.
When the recorder and remote are connected by the
control S cable, infrared rays are not emitted from the
remote and infrared rays are not received by the
recorder.
When the remote is used as the wireless remote,
unplug from the jack of the recorder and remote.
16
To power outlet
Remote or
control
component
DIGITAL
OPTICAL IN
CD player or
DAT recorder,
MD recorder
1 Prepare necessary connecting cables.
• Audio connecting cable (pin type)
White
Left (L)
Right (R)
Red
• Optical Digital connector cable POC-15A
• Coaxial digital connecting cable VMC-10
• Control S cable (accessory)
(Mini-jack)
2 Connect.
xWhen connecting with mixer
Use audio connecting cords.
Connect a white pin with the white (L) jack and a red
pin with the red (R) jack. Be sure to securely plug
into the jacks during connection. If not, noise may
occur.
MD recorder
ANALOG(UNBAL)
IN OUT
L
R
ç : Flow of signal
White
Left (L)
Right (R)
Red
Mixer
Ç
2TR
OUT IN
L
R
Ç