Sony MDS-E10 Operating Instructions Manual page 48

Copying names (Name Copy)
You can copy track or disc names to other tracks within the
disc.
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
"Edit Menu" appears in the display.
2
Turn AMS (or press ./> repeatedly) until
"Name?" appears in the display; press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until "Nm
Copy?" appears in the display; press AMS or YES.
4
Turn AMS (or press ./> repeatedly) until the
track name (when copying the track name) or "Disc"
(when copying the disc name) flashes in the display;
press AMS or YES.
When "No Name" is displayed
The selected track or disc has no name.
5
Turn AMS (or press ./> repeatedly) until to
the track number to be copied to (when naming a
track) or "Disc" (when naming a disc) flashes in the
display; press AMS or YES.
"Complete!" appears for a few seconds, and copying is
complete.
To cancel the operation
Press MENU/NO or x.
z When "Overwrite??" appears in step 5
A track name or disc name has already existed to the
target track. If you still want to copy the name, press
AMS or YES again while the indication is displayed.
Note
When a track name of a track recorded in MDLP (LP2 or
LP4) is copied onto a track recorded in stereo or monaural,
the "LP:" stamp indicating an MDLP recording is copied to
the beginning of the track and displayed.
48
Copying the same name to all tracks and
disc. (Name All Copy)
You can copy the same name simultaneously to all tracks
and disc on the MD.
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
"Edit Menu" appears in the display.
2
Turn AMS until "Name?" appears in the display;
press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until "NM
All Copy?" appears, then press AMS or YES.
4
Turn AMS (or press ./> repeatedly) until the
track name (when copying the track name) or "Disc"
(when copying the disc name) flashes in the display;
press AMS or YES.
When "No Name" is displayed
The selected track or disc has no name, and copying
cannot be completed. "Empty Name" will be
displayed.
5
Turn AMS (or press ./> repeatedly) until the
correct selection (below) appears; press AMS or
YES.
Name
Only the section without a name
(No Name) is copied
All names are to be overwritten
"Complete!" appears for a few seconds, and copying is
complete.
To cancel the operation
Press MENU/NO or x.
Note
• Copying of all names cannot use the "Undo?" function,
so make sure to be careful before completing the
copying.
• When a track name of a track recorded in MDLP (LP2 or
LP4) is copied onto a track recorded in stereo or
monaural, the "LP:" stamp indicating an MDLP
recording is copied to the beginning of the track and
displayed.
Selection
Copy Only
No Name ?
Copy All
Overwrite?