Naming A Track Or Md (Name) - Sony MDS-E10 Operating Instructions Manual

Naming a Track or MD
(NAME)
You can enter a name for a recorded MD, as well as for
individual tracks. Names can consist of uppercase and
lowercase letters, numbers and symbols. A total number of
1,700 characters can be stored for all names on the MD.
NENU / NO
LETTER/NUMBER
NAME, CHAR, NUM
/
/
Notes
If you name a track while it is being recorded, be sure to
finish the naming operation before the track ends. If the
track ends before you finish, the entered character data
will be discarded and the tracks will remain unnamed.
Also, you can't name tracks while the recorder is recording
over existing material.
46
LEVEL / DISPLAY / CHAR
MENU / NO YES
CLEAR AMS /
M.ACCESS
YES
CONTINUE SHUFFLE PROGRAM
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
-
>
25
CLEAR
NAME CHAR NUM
RM-DR1J
Naming a Track or MD using the controls
on the recorder
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
"Edit Menu" appears in the display.
2
Turn AMS until "Name?" appears in the display;
press AMS or YES.
3
Turn AMS until "Nm In?" appears, then press AMS
or YES.
When naming is being made during recording, the
cursor flashes and characters can be entered. Please
proceed to step 5.
4
Turn AMS until the track number (when naming a
track) to "Disc" (when naming the MD) flashes, then
press AMS or YES.
When the cursor flashes, characters can be entered. The
track number flashes, the track begins to play back
automatically so the track can be confirmed and the
track name entered.
N m I n
5
Press LEVEL/DISPLAY/CHAR repeatedly to select the
character type
To select Press repeatedly until
Uppercase letters "A" appears in the display
Lowercase letters "a" appears in the display
Numbers "0" appears in the display
Symbols* " ' " appears in the display
*Symbols which can be used: '_/,.():!?&+<>_=";#$%@ * `
N m I n
A
To enter a space
Press M while the cursor is flashing. However, the first
character of the name cannot be a space.
T r 2 1
T r 2 1