Playing A Specific Track - Sony MDS-E10 Operating Instructions Manual

Playing a Specific Track

While the recorder is playing, pause or stopped, use the
procedure below to quickly play any track.
AMS
Locating a track with AMS*
To go to
The next or a succeeding
track during play
A preceding track
during play
The beginning of the
current track during play
A specific track while the
recorder is stopped
* Automatic Music Sensor
z To locate the last track of the MD quickly
While the recorder is stopped, turn AMS
counterclockwise (or press . once).
z If you locate a track while the recorder is stopped or paused
The recorder will still be stopped or paused at the
beginning of the located track.
M.ACCESS
CONTINUE SHUFFLE PROGRAM
1 2 3 4 5
NUMBER BUTTONS
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
>25
>
25
M.SCAN NAME CHAR NUM
/ (AMS)
RM-DR1J
Do the following:
Turn AMS clockwise (or press
> repeatedly).
Turn AMS counterclockwise
(or press . repeatedly).
Turn AMS counterclockwise
(or press . once).
1 Turn AMS (or press ./
> repeatedly) until the
track number appears in the
display.
2 Press AMS or 7.
Playing a track by entering the track
number Z
Press the number button(s) to enter the track number of
the track you want to play.
To enter a track number over 26
1
Press >25.
See the examples below for the number of presses.
2
Enter the corresponding digits.
To enter 0, press 10 instead.
Examples:
• To play track number 30, press >25, then 3 and 10.
• To play track number 108, press >25 twice, then 1, 10,
and 8.
z If you enter a track number while the recorder is paused
The recorder will be paused at the beginning of the
track.
Locating a point by monitoring the
beginning of each track Z (Music Scan)
If M.SCAN is pressed during stop, the beginning of each
track is played sequentially only at the set fix time.
Press H for the track you want to monitor.
z You can adjust the play time for the beginning of a track by
MUSIC SCAN
1 Press MENU/NO twice.
"Setup Menu" appears in the display.
2 Turn AMS (or press ./> repeatedly) to select
"Music Scan," then press AMS or YES.
3 Turn AMS until the desired time of 6 to 20 seconds
appears in the display, then press AMS or YES.
4 Press MENU/NO.
29