Miele PG 8130 U Operating Instructions Manual page 66

Problem solving guide
Problem
White residue is visible
on the dishes. Clouding
occurs on glassware
and cutlery; film can be
wiped off.
There are rust stains on
cutlery.
66
Possible cause and solution
The rinse aid dosage is set too low.
 Increase the dosage (see "Settings menu, Rinse
aid").
The salt reservoir is empty.
 Fill the salt reservoir (see "Commissioning,
Reactivation salt").
The salt reservoir cap has not been screwed on
correctly.
 Replace it, making sure that it screws back on
correctly.
The water softener is programmed to too low a water
hardness level.
 Program the water softener to a higher water
hardness level (see "Settings menu, Water
hardness").
A program was not run after reactivation salt was
added. Traces of salt have got into the wash cycle.
 Always run the 
refilling salt.
The affected items are not corrosion resistant.
 Purchase cutlery which is dishwasher-proof.
program after
Rinse & Hold