Miele PG 8130 U Operating Instructions Manual page 60

Problem solving guide
Problem
One of the following
fault messages is
displayed:

Fault FXX

Waterproof

Fault F78
60
Possible cause and solution
Before remedying the fault:
 Turn the dishwasher off with the  button.
There may be a technical fault.
After a few seconds:
 Turn the dishwasher back on.
 Select the desired program.
 Press the Start button.
If the fault message appears again, there is a
technical fault.
 Call Miele Service.
The Waterproof system was activated.
 Turn off the water supply.
 Call Miele Service.
A fault has occurred in the circulation pump.
 Turn the dishwasher off for at least 30 seconds
with the  button.
 Turn the dishwasher back on.
 Select the desired program.
 Press the Start button.
If the fault message appears again, there is a
technical fault.
 Call Miele Service.