Table of Contents
Advertisement
Time display
The estimated duration of the program
selected appears in hours and minutes
in the display before the program
begins. During the program, the time
left until the end of the program is
displayed.
Each program phase is indicated by a
symbol:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
End
The displayed program duration may
vary with the same program. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process of the water
softener and the amount of dishes.
The times shown in the program
overview refer to standard test loads
and temperatures.
Each time a program is run, the
electronic module calculates the
program duration required depending
on the temperature of the water taken
into the dishwasher and the amount of
dishes.
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a button has been
pressed or after the end of a program.
Press the button to switch the
dishwasher back on.
The dishwasher will not turn off
automatically if the time of day display
has been activated (see "Settings
menu, Time of day").
The dishwasher will not switch off
while a program or the FlexiTimer is
running or if there is a fault.
Operation
43
Hide quick links:
Advertisement
Table of Contents
