Ovsdb Server Certificate; Ovsdb Server Enable - H3C S6800 Series Command Reference Manual

Predefined user roles
network-admin
Parameters
ca-filename: Specifies the CA certificate file name, a case-insensitive string. The file name cannot
contain the slot string.
bootstrap: Obtains a CA certificate file from the controller if the specified CA certificate file does not
exist. The obtained file will be stored under the path specified for the ca-filename argument.
Usage guidelines
You must specify a CA certificate file for establishing active or passive OVSDB SSL connections.
This command takes effect after you execute the ovsdb server enable command.
Examples
# Specify a CA certificate file for SSL.
<Sysname> system-view
[Sysname] ovsdb server ca-certificate flash:/vswitchd.cacert bootstrap

ovsdb server certificate

Use ovsdb server certificate to specify a certificate file for SSL.
Use undo ovsdb server certificate to remove the certificate file setting for SSL.
Syntax
ovsdb server certificate cert-filename
undo ovsdb server certificate
Default
No certificate file is specified.
Views
System view
Predefined user roles
network-admin
Parameters
cert-filename: Specifies the certificate file name, a case-insensitive string. The file name cannot
contain the slot string.
Usage guidelines
You must specify a certificate file for establishing active or passive OVSDB SSL connections.
This command takes effect after you execute the ovsdb server enable command.
Examples
# Specify a certificate file for SSL.
<Sysname> system-view
[Sysname] ovsdb server certificate flash:/ovsclient-cert.pem

ovsdb server enable

Use ovsdb server enable to enable the OVSDB server.
30