Table of Contents
Advertisement
Importing Data into WaveVision5
7
Importing Data into WaveVision5
The data from the Logic Analyzer has the following (or similar) format:
When the data is imported into WaveVision, it is necessary to make selections about how the data was
taken so that it can be correctly reconstructed. Some of these selections are: Demux / Non-Demux Mode,
DES / Non-DES Mode, Hexadecimal / Binary / Decimal, Sampling Rate, and Number of Bits. For example,
this data was taken on the I-channel in Demux, Non-DES Mode in the Hexadecimal format.
For Non-DES Mode, the data is ordered {DId, DI} or {DQd, DQ}. For DES Mode, the data is ordered {DQd,
DId, DQ, DI}.
1. To import data, select Channels → Import WaveVision 4 data or a single/double column ASCII data file
12
ADC1xD1x00CVAL Board User's Guide
Figure 7. Logic Analyzer Data Listing View
Copyright © 2017, Texas Instruments Incorporated
www.ti.com
SNAU212 – June 2017
Submit Documentation Feedback
Advertisement
Table of Contents
