Undoing The Last Edit; Undo Function - Sony CMT-PX333 Operating Instructions Manual

4
Press . or > for the MD until the
first track number of the two to be
combined appears, then press ENTER/
YES on the remote.
5
Press . or > for the MD until the
second track number of the two to be
combined appears.
6
Press ENTER/YES on the remote.
"Complete!" appears.
Notes
• Tracks recorded in different recording modes
(stereo, LP2, LP4 or MONO) cannot be combined.
• If both of the combined tracks have track titles, the
title of the second track is erased.

Undoing the last edit

— Undo Function

You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo an edit if
you do any of the following after the edit:
• Do another edit.
• Start recording.
• Update the TOC by turning off the system or
ejecting the MD.
• Disconnect the mains lead.
1
Press MENU/NO on the remote in stop
mode to display "Edit Menu".
2
Press . or > for the MD until
"Undo?" appears.
"Undo?" does not appear, when there is no
editing function that can be cancelled.
3
Press ENTER/YES on the remote.
A message appears.
4
Press ENTER/YES on the remote again.
"Complete!" appears.
31