Timer Recording Radio Programmes - Sony CMT-PX333 Operating Instructions Manual

Timer recording radio
programmes
To timer record, you must first preset the radio
station (see "Presetting radio stations" on page
34) and set the clock (see "Setting the time" on
page 7).
1
Tune in the preset radio station (see
"Listening to the radio" on page 35).
2
Press CLOCK/TIMER SET on the
remote.
3
Press . or > on the remote until
"REC SET?" appears, then press
ENTER/YES on the remote.
4
Press . or > on the remote to
select one of "REC 1" to "REC 3", then
press ENTER/YES on the remote.
5
Press . or > on the remote until
"ONCE?", "DAILY?" or "WEEKLY?"
appears.
If you select "ONCE?", the recording timer
activates only once. If you select
"DAILY?", the timer activates at the same
time every day. If you select "WEEKLY?",
the timer activates at the same time on the
set day of every week.
6
Press ENTER/YES on the remote.
If you select "ONCE?" or "WEEKLY?",
the day indication starts flashing. If you
select "DAILY?", the hour indication starts
flashing.
7
Press . or > on the remote to
select the desired day.
If you select "DAILY?" in step 5, proceed
to step 9.
8
Press ENTER/YES on the remote.
The hour indication flashes.
9
Set the time to start recording.
Press . or > on the remote to set the
hour, then press ENTER/YES on the
remote.
The minute indication flashes.
Press . or > on the remote to set the
minute, then press ENTER/YES on the
remote.
The hour indication flashes again.
10
Set the time to stop recording following
the procedure in step 9.
11
Select the recording mode (e.g., LP2)
by pressing . or > on the remote,
then press ENTER/YES on the remote.
The timer recording settings appear, then
the original display returns.
12
Insert a recordable MD.
If you use a partially recorded MD,
recording starts after the recorded tracks.
13
Press ?/1 to turn off the system.
continued
39