Moving Recorded Tracks; Move Function; Dividing Recorded Tracks; Divide Function - Sony CMT-PX333 Operating Instructions Manual

Moving recorded tracks

— Move Function

You can use this function to change the order
of any track on the disc. When you move
tracks, the tracks are automatically
renumbered.
E.g.: Moving track 3 to position 2.
Track
number
1 2
Original
A B
tracks
2
1
After
A C
MOVE
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO on the remote to
display "Edit Menu".
3
Press . or > for the MD until
"Move?" appears, then press ENTER/
YES on the remote.
4
Press . or > for the MD until the
desired track number to move appears,
then press ENTER/YES on the remote.
5
Press . or > for the MD until the
new track position appears.
Original track number New track position
6
Press ENTER/YES on the remote.
"Complete!" appears.
3 4
C D
3 4
B D

Dividing recorded tracks

— Divide Function

You can use this function to mark track
numbers after recording. The total number of
tracks increases by one and all the tracks
following the divided ones are renumbered.
E.g.: Dividing track 2 into two tracks.
Track
number
1 2
Original
A B
tracks
1 2
After
A B
DIVIDE
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO on the remote to
display "Edit Menu".
3
Press . or > for the MD until
"Divide?" appears, then press ENTER/
YES on the remote.
4
Press . or > for the MD until the
desired track number to divide appears,
then press ENTER/YES on the remote.
"—Rehearsal—" appears and the portion to
be divided is played repeatedly.
5
While monitoring the sound, press .
or > for the MD to adjust the point to
be divided.
You can shift the point by 1/86 second
(1 frame) intervals.
To shift the point by second or minute
intervals, press and hold m or M (or
press m or M on the remote) so that
second or minute flashes, then press . or
> for the MD.
6
Press ENTER/YES on the remote.
"Complete!" appears.
3
C D
Divide track 2 into
track B and C
3 4
C D
continued
29