Sony CMT-PX333 Operating Instructions Manual page 33

Fade-in and Fade-out
Recording
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO on the remote to
display "Edit Menu".
3
Press . or > for the MD until "S.F
Edit?" appears, then press ENTER/YES
on the remote.
4
Press . or > for the MD until
"Fade In?" or "Fade Out?" appears,
then press ENTER/YES on the remote.
5
Press . or > for the MD until the
track number you want to change the
recording level appears, then press
ENTER/YES on the remote.
"Time 5.0s" appears in the display.
6
Press . or > for the MD to change
the Fade-in or Fade-out recording time.
The system plays the portion that will be
recorded over using Fade-in or Fade-out
Recording. You can set the time at any
value between 1.0 second and 15.0 seconds,
in 0.1 second steps. You cannot set the time
longer than the track.
7
Press ENTER/YES on the remote.
"S.F Edit OK?" appears in the display.
8
Press ENTER/YES on the remote again.
The deck starts recording over the existing
track. "S.F Edit: ** %" appears while the
track is being recorded. When the recording
finishes, "Complete!" appears in the display
for a few seconds.
To cancel the operation
Press MENU/NO on the remote in steps 4 to 7.
After recording starts in step 8, you cannot
interrupt the operation.
Notes
• You cannot use S.F Edit for tracks recorded in
MDLP mode.
• You cannot undo the S.F Edit Function even if you
use the Undo Function.
• Do not disconnect the mains lead or move the
system while recording is in progress. This may
damage the recording data preventing recording
from being performed properly.
• Do not use an MD that is damaged or dirty. This
may prevent recording data from being recorded
properly.
• Repeatedly changing the recording level results in
poor sound quality.
• The recording level will not return to the exact
original level once the recording level has been
changed even if it returned to the original level.
• The recording level cannot be changed while the
timer is activated.
33