Sony CMT-PX333 Operating Instructions Manual page 26

Labelling an MD (continued)
5
Repeat steps 3 and 4 to enter the rest
of the name.
To change a character
Press TCURSOR or CURSORt on the
remote repeatedly until the character to be
changed flashes, press CLEAR on the
remote to erase the character, then repeat
steps 3 and 4.
6
Press ENTER/YES on the remote to
complete the labelling procedure.
Note
You can label a track title during play. The playback
repeats until you finish labelling.
Copying a disc or track title
You can copy a labelled disc or track title to
use it as a title of another track or the disc title
within a disc.
1
Press MENU/NO on the remote in stop
mode.
2
Press . or > for the MD until
"Name?" appears, then press ENTER/
YES on the remote.
3
Press . or > for the MD until "Nm
Copy?" appears, then press ENTER/
YES on the remote.
4
Press . or > for the MD to select
"Disc" (when copying the disc title) or
the track number with the title you want
to copy, then press ENTER/YES on the
remote.
5
Press . or > for the MD to select
the copy destination track number or
"Disc" (when copying as the disc title),
then press ENTER/YES on the remote.
When "Overwrite??" appears
The copy destination already has a disc or track
title. To continue and copy the title, press
ENTER/YES on the remote.
If the track has been recorded in MDLP mode
with the "LP Stamp On" setting (page 20),
"Overwrite??" also appears even if a track
name is not assigned. In this case if you copy
the track name, the "LP:" indication disappears
from the track name.
26
Checking the titles
To check the disc titles, press SCROLL on the
remote in stop mode. To check the track title,
press SCROLL on the remote during play. The
title appears scrolling in the display. To stop
scrolling, press SCROLL on the remote. Press
the button again to resume scrolling.
Erasing the titles
1
Press MENU/NO on the remote in stop
mode.
2
Press . or > for the MD until
"Name?" appears, then press ENTER/
YES on the remote.
3
Press . or > for the MD until "Nm
Erase?" appears, then press ENTER/
YES on the remote.
4
Press . or > for the MD until the
desired title to erase appears, then
press ENTER/YES on the remote.
To erase all the titles, press . or > for
the MD until "Nm All Ers?" appears in step 3,
then press ENTER/YES on the remote twice.