Listening To The Radio; Preset Tuning - Sony CMT-PX333 Operating Instructions Manual

Listening to the radio

— Preset Tuning

Preset radio stations in the tuner's memory first
(see "Presetting radio stations" on page 34).
1
Press TUNER/BAND repeatedly to
select "FM" or "AM".
2
Press TUNING MODE repeatedly until
"PRESET" appears.
3
Press TUNING + or – (or + or – on the
remote) to select the desired preset
station (or station name* or RDS
station name**).
* The station name appears only if you have
labelled the station (see "Labelling the preset
stations" on the next page).
** European model only.
To Do this
Turn off the radio Press ?/1.
Change the display Press DISPLAY repeatedly.
The display changes cyclically
as follows:
Preset Equalizer name t
Clock display t Volume t
Name*
* Displayed only when disc title, track title, radio
station name or other name information is labelled.
No display when this information is not labelled.
Tip
You can also select the preset number using the
remote.
Press the number buttons in step 3.
To enter preset number over 10
(on the remote only)
1
Press >10.
2
Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter preset number 30, press >10, then 3 and
10/0.
Listening to non-preset radio
stations
• Press TUNING MODE repeatedly until
"MANUAL" appears in step 2, then press
TUNING + or – (or + or – on the remote) to
tune in the desired station (Manual
Tuning).
• Press TUNING MODE repeatedly until
"AUTO" appears in step 2, then press
TUNING + or – (or + or – on the remote).
The frequency indication changes and the
scanning stops when the system tunes in a
station (Automatic Tuning).
To cancel Automatic Tuning
Press TUNING MODE.
Tips
• To improve broadcast reception, adjust the supplied
aerials, or connect a commercially available
external aerial.
• When an FM stereo programme has static noise,
press STEREO/MONO repeatedly until "MONO"
appears. There will be no stereo effect, but the
reception will improve.
35