Load Options For Ssp, Reload, And Customize - IBM System/36 Maintenance Information Manual

326 Load Options for SSP, Reload, and Customize
Select Load Load Program IPL
Function Option From
Loaded
Time! Description
1 0000 Disk SSP 5-9 Normal load.
1 FFOO Disk
SSP 4 Bypass wrap tests.
2 0000 Diskette SSP 4-12 Load main storage SSP from diskette and reload
(SSP01) Reload SSP diskettes to disk.
2 FFOO Diskette SSP 1-5 Load main storage SSP from diskette, bypass wrap
(SSP01) Reload tests, and reload SSP diskettes to disk.
3
0000 3
Diskette 61 DCP 4-8 Sense devices, assemble UDT and run I/O wraps.
3
1000 Diskette 61 AUTO 4-8 Sense devices, assemble UDT, and run I/O wraps.
CONFIC Prompts user for input about the system. Device,
keyboard, serial number, printer address.
3
CECE2 Diskette 61
AUTO 4-8 Sense devices, assemble UDT, and run I/O wraps.
CONFIC Prompts user for input about the system. Device,
keyboard, serial number, printer address.
3
FF003
Diskette 61 DCP 1-2 Bypass wrap tests; sense devices, assemble UDT.
3
FFF03
Diskette 61 DCP 1 Load DCP from diskette, bypass channel wraps.
3
22224
Diskette 61 INIT 4-8 Initialize the disk, run wraps.
3
22FF4 Diskette 61
INIT
2-6 Initialize the disk, bypass wraps.
1
IPL times are approximate in minutes.
2 The CECE load option displays the hardware configuration. You can select an option to change the
machine serial number or to change the printer address. After you select the option, follow the
prompts to completion.
3
The DCP Main menu appears and the following options are available: System Customize (insert
diskette 62), Program Patch (insert diskette 62), System Records List (insert diskette 62), Network
Analysis (insert diskette 61), RPQ Utilities, Supervisor Options and Change System Printer. After you
select the option, follow the prompts to completion.
4 Select the disk drive to be initialized and wait until it is done initializing. When disk initialization is
completed, the screen will state that the disk is 100% initialized. You may then perform an AUTO
CONFIG.
Section 3. General Procedures
3-9