IBM System/36 Maintenance Information Manual page 60

To Display the Spooled Output
1.
From the Main (help) menu, select the option to perform general system activities.
2. From the SYSSESN menu, select the option to control printing (spool file).
3. On the Spool File Status display (upper half of the display), locate and record the spool ID (SP-ID)
number for the procedure (PROC) ERAP.
4. From the SPOOLJOB menu Oower half of the display), select the option to control the spool writer and
stop spooling to the selected printer, or select the option to hold entries and enter the spool ID. Return
to the SPOOLJOB menu.
5. From the SPOOLJOB menu, select the option to copy or display entries.
6. On the COPYPRT procedure prompt, enter the spool ID (first item) and CRT (last item).
Note: You can also copy the ERAP data to a named file, and you can cancel or release the spool entry
in the same operation.
7. On the display that shows the error history table, position the cursor to the DISP START POS field and
enter 70. You are now displaying the last 62 positions of the spooled output. Use the roll keys to view
entries in the table.
8. Use the Cmd7 key to return through the prompts and menus. Restart the spool writer, or release or
cancel entries as you return.
3-26
5363 Maintenance Information