Start Options - IBM Aptiva 2165 Hardware Maintenance Service

2. Type "Y" to select YES, then press Enter
3. Highlight the option Save & Exit Setup option, then press Enter.
A dialog box appears saying "
4. Type "Y" to select Yes, then press Enter to save the changes in CMOS
You must load the Setup default settings in the following instances:
−
When you replace the system battery
−
When you customize your system configuration settings and some
resource assignments conflict causing the computer to hang.
Exiting Setup (Save & Exit Setup/Exit Without Saving)
Press to return to the main menu when you have finished viewing
Esc
settings and making changes. From this location, you can exit Setup
and save your changes or exit without saving your changes.
Follow these steps to exit Setup:
1. From the main menu, press the
2. The Exit Setup dialog box appears saying Quit Without
Saving(Y/N) ? Type "Y" if you want to quit directly.
You also can Exit the Setup via highlighting the
option or
Exit without Saving

Start Options

Setup automatically updates this menu when you do either of the following:
−
Add or change hardware on your computer
−
Make changes to other menus in Setup and save those changes
To view the computer information such as the model number, serial number,
and BIOS version and date, select the Standard CMOS Setup option from the
Setup main menu. The items displayed are not configurable.
SAVE to CMOS and EXIT (Y/N)?"
key.
Esc
Save & Exit Setup
option and follow the dialog box directions.
1-13