Adjusting The Shoulder Belt Height - Edwards & Co AVERY FA0062 Instruction Manual

ADJUSTING THE SHOULDER BELT HEIGHT

1.
There are three height slot positions for the shoulder belts. As your
child grows, you will need to adjust the belt slot position according to
your child's height.
The shoulder belts should be positioned so that they sit level or
just above your child's shoulders. Diagram 1 shows the correct belt
position.
To adjust the shoulder belt height:
1. Remove the ends of the shoulder belts from the metal splitter
plate behind the car seat as shown in Diagram 2.
2. Pull the belts through to the front of the car seat.
3. Re-insert the belts through the appropriate slots in the car seat
shell and through the layers of cushioning as appropriate.
4. Re-attach the loops on the belts to the metal splitter plate. Make
sure the belt does not twist in any way.
WARNING - Do not allow the harness belts to become
twisted. The belts should be flat against your child's body.
WARNING
- Do not use the car seat if the child's shoulders are above
the highest slots in the backrest or if the child's weight exceeds 13kg.
2.
13