CONNECTING TO YOUR STROLLER
Connecting the car seat
1.
Insert the car seat's locking piece into the stroller receiver.
2. You will hear a CLICK! upon successful connection.
3. Check that both sides have successfully connected.
Removing the car seat
1.
Press the first of the release buttons as pictured.
2. Press the second of the release buttons as pictured.
3. Lift the car seat using the handle.
IMPORTANT
- This Avery Car Seat Capsule (FA0062) can only be
connected to Edwards & Co M Series strollers, such as the Oscar Mx.
press here
press here
17