Table of Contents
Advertisement
SECURING THE HARNESS TO YOUR CHILD
Securing the harness clips
1.
Place your child in the car seat. Make sure that your child's back
and bottom are flat against the car seat. This will maximise
comfort and allow the harness to properly secure your child.
2. Check the height of the shoulder portion of the harness (called the
shoulder belts) according to your child's height. The shoulder belts
should be level with their shoulders. To adjust the shoulder belt
height see 'Adjusting the shoulder belt height'.
WARNING
above the highest slots in the backrest or if the child's weight
exceeds 13kg.
3. As pictured in Diagram 1, combine the two locking clips together
and insert them into the buckle housing until you hear a CLICK!
When it is connected it should appear as pictured in Diagram 2.
Check that the buckle is secure by pulling the buckle.
1.
- Do not use the car seat if the child's shoulders are
(continued next page)
2.
15
Advertisement
Table of Contents
