Edwards & Co AVERY FA0062 Instruction Manual
  1. Manuals
  2. Brands
  3. Edwards & Co Manuals
  4. Car Seat
  5. AVERY FA0062
  6. Instruction manual

Edwards & Co AVERY FA0062 Instruction Manual

Car seat capsule
Hide thumbs Also See for AVERY FA0062:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION
MANUAL
AVERY Car Seat Capsule
MODEL FA0062
Keep for future reference.
To reduce the risk of serious injury or death, read this owner's
manual prior to installing and using this car seat.
Suitable for 0 to 13 kg.
Certified to European ECE R44/04 in Group 0+ as approved by
Land Transport NZ.

Advertisement

Table of Contents
loading

Related Manuals for Edwards & Co AVERY FA0062

Summary of Contents for Edwards & Co AVERY FA0062

  • Page 1 INSTRUCTION MANUAL AVERY Car Seat Capsule MODEL FA0062 Keep for future reference. To reduce the risk of serious injury or death, read this owner’s manual prior to installing and using this car seat. Suitable for 0 to 13 kg. Certified to European ECE R44/04 in Group 0+ as approved by Land Transport NZ.
  • Page 2 INTRODUCTION Hey there! Firstly, thanks for choosing Edwards & Co - it truly means a lot to us that you have chosen one of our car seats to keep your family safe. A lot of time and money is spent ensuring that your car seat is the safest it can be.

  • Page 3: General Warnings

    GENERAL WARNINGS SERIOUS INJURY or DEATH, read this owner’s To reduce the risk of manual and your vehicle owner’s manual before installing and using this car seat. By properly using this car seat and following these instructions (and the instructions that accompany your vehicle), you will greatly reduce the risk of serious injury or death to your child in the event of a collision.
  • Page 4 GENERAL WARNINGS • The car seat is not intended to be a substitute baby cot or bed. It is only designed to enable safe transportation of children in NEVER motor vehicles. leave a baby in the restraint for long periods of time. •...
  • Page 5 FEATURES OF THE CAR SEAT head support handle bar shoulder pads buckle release button harness adjusting strap handle release button lap belt guide rocking base canopy shoulder belt routing guides handle locking indicator level indicator stroller locking piece...
  • Page 6 INSERT CUSHION & WEDGE The insert cushion and lumbar wedge are designed to provide comfort to your newborn baby. As your baby grows, these can be adjusted to adapt to your baby’s growing size. Lumbar wedge Insert cushion Age suitability: Stage 1.
  • Page 7 INSERT CUSHION & WEDGE Stage 2. Insert cushion without lumbar wedge - suitable from newborn to <8kg (approximately 5 months). The lumbar wedge can be removed and insert cushion used alone once baby can hold their head unaided or when they reach 8kg in weight, whichever is earlier.

  • Page 8: Adjusting The Handle

    ADJUSTING THE HANDLE To adjust the handle, squeeze and hold both handle release buttons located in the centre of the handle hinge, rotate the handle then release the button. The handle will lock into a position when you hear CLICK! There are three positions (as pictured): Handle up.

  • Page 9: Where To Install The Car Seat

    WHERE TO INSTALL THE CAR SEAT WARNING - This car seat is only suitable for approved vehicles fitted with a 3 point seat static or retractable seat belt. WARNING - Only install the car seat in a forward-facing passenger seat as indicated in Diagram 1 above. A forward-facing passenger seat is one that faces in the direction of the car’s movement.
  • Page 10 INSTALLING THE SEAT TO YOUR CAR DIRECT INSTALL METHOD (WITHOUT CAR SEAT CAPSULE BASE) Place the car seat into your vehicle’s passenger seat and face the car seat towards the rear of the vehicle (rear face). WARNING - Check the handle is in the ‘Handle up’ position as pictured in Diagram 1 on page 8.
  • Page 11 INSTALLING THE SEAT TO YOUR CAR DIRECT INSTALL METHOD (WITHOUT CAR SEAT CAPSULE BASE) 3. Pull the vehicle’s shoulder belt around the back of the car seat through the belt route guides as pictured in Diagram 2. 4. Connect the seat belt tongue to the buckle. 5.
  • Page 12 USING THE LEVEL INDICATOR • The level indicator is designed to help you install the car seat at the correct angle on the passenger seat. It is located on the outside of the seat as pictured in Diagram 1. • When the car seat is fitted to your vehicle, the level indicator bell should always fit inside it’s housing as pictured in Diagram 2.
  • Page 13 ADJUSTING THE SHOULDER BELT HEIGHT There are three height slot positions for the shoulder belts. As your child grows, you will need to adjust the belt slot position according to your child’s height. The shoulder belts should be positioned so that they sit level or just above your child’s shoulders.
  • Page 14 SECURING THE HARNESS TO YOUR CHILD Loosening the shoulder belts Loosen the shoulder belts by simultaneously pushing the belt adjuster button and pulling the shoulder belts towards yourself as pictured in Diagram 1. 2. Open the harness by pressing the red buckle release button on the buckle.
  • Page 15 SECURING THE HARNESS TO YOUR CHILD Securing the harness clips Place your child in the car seat. Make sure that your child’s back and bottom are flat against the car seat. This will maximise comfort and allow the harness to properly secure your child. 2.
  • Page 16 SECURING THE HARNESS TO YOUR CHILD Tightening the shoulder belts Pull the harness adjusting belt as pictured in Diagram 1. 2. A correctly secured harness is pictured in Diagram 2. For proper tightness, one finger should fit between the shoulder belts and the child’s shoulders.
  • Page 17 CONNECTING TO YOUR STROLLER press here press here Connecting the car seat Insert the car seat’s locking piece into the stroller receiver. 2. You will hear a CLICK! upon successful connection. 3. Check that both sides have successfully connected. Removing the car seat Press the first of the release buttons as pictured.
  • Page 18 WARRANTY All Edwards & Co products are guaranteed for two years from the date of purchase against defects in material and workmanship. If we determine that the product has a manufacturing fault, we will repair or replace it free of charge to you. The decision to repair or replace is solely at the discretion of Edwards &...
  • Page 19 CLEANING & CARE Important information • NEVER lubricate or oil any part of the seat. • Only use mild detergents. • Wipe clean the seat shell, harness and EPS foam lining inside only. • NEVER use solvents, harsh detergents or washing up liquids as these may damage the harness and seat.
  • Page 20 www.edwardsandcobaby.com...

Table of Contents