Additional Specifications; New Vehicle Break-In; Engine Oil; Engine Oil Capacity - Subaru Outback 2020 Getting Started Manual

Hide thumbs Also See for Outback 2020:
Table of Contents

Advertisement

ADDITIONAL SPECIFICATIONS

NEW VEHICLE BREAK-IN

The performance and long life of your Subaru are dependent on how you handle and care
for your Subaru while it is new.
Follow these instructions during the first 1,000 miles:
• Do not race the engine.
• Do not drive at one consistent engine or vehicle speed, either fast or slow.
• Avoid starting suddenly and rapid acceleration, except in an emergency.
• Avoid hard braking, except in an emergency.

ENGINE OIL

Use 0W-20 synthetic, with one of the follow specifications:
• API classification SN or SN PLUS with the words "RESOURCE CONSERVING".
• ILSAC GF-5, which can be identified with the ILSAC certification mark (Starburst mark).

ENGINE OIL CAPACITY

2.4L Turbo Engine
4.8 US quarts (during oil and filter change)
2.5L Engine
4.4 US quarts (during oil and filter change)
There is approximately 1 quart between the low and
full level.
1
Full Level
2
Low Level
ROOF RAIL CAPACITY
CROSS BARS DYNAMIC
150 Pounds
ROOF RAILS DYNAMIC
176 Pounds
ROOF RAILS STATIC
176 Pounds
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Outback xt 2020

Table of Contents